Fitment

Revel VLS 52mm 50-300 Deg F Dual Intercooler Temperature Gauge

CA$341.06
In stock
SKU
1TR1AA006R

The 52mm Revel VLS OLED Intercooler Dual Temperature gauge monitors both inlet and outlet air temperatures of the intercooler to allow for accurate readings while tuning the vehicle. The dual LED outer rings allow for quick glances of the air temperatures during driving and the OLED center display provides readings from 50 ºF up to 300 ºF of each side.

OLED Intercooler Dual Temperature Gauge by Revel VLS

The 52mm Revel VLS OLED Intercooler Dual Temperature gauge monitors both inlet and outlet air temperatures of the intercooler to allow for accurate readings while tuning the vehicle. The dual LED outer rings allow for quick glances of the air temperatures during driving and the OLED center display provides readings from 50 ºF up to 300 ºF of each side.

The dual temperature reading is achieved by installing the air temperature sensors on the piping of both the entrance side and exit side of the intercooler. The IN TEMP sensor is installed on the piping after the turbo and before the intercooler, and the OUT TEMP sensor is installed on the piping after the intercooler and before the engine intake.

Maximum comfort is attained by the use of an OLED (Organic Light Emitting Diode) numerical display. When compared to a traditional LCD display, the OLED display provides sharper contrast resulting in a deeper black for a crisp, clear images that is easier to read at a glance. The technology also allows for undistorted viewing angles approaching 170 degrees. The OLED display also does not require a backlight to be clearly visible at night, which gives the slim profile of the gauge — perfect for mounting in areas where space is an issue. All Revel VLS gauges include the necessary hardware, sensors, and universal mounting pod and hood, as well as the installation instructions

Features

  • 2 1/16 in. (52mm) diameter gauge
  • Monitor both enter & exit temperatures
  • 50 ºF to 300 ºF readings
  • Digital OLED display
  • 14 LED outer ring per side
  • Air temperature sensors included (3/8 NPT thread pitch)
  • Mounting kit included

Please Note: Requires weld-in bung (not included). The Revel VLS Intercooler Dual Temperature gauge is not daisy-chain compatible.

Applications

  • Universal

What's In The Box?

  • 1 - Dual IC Temperature Gauge (52mm)
  • 1 - Power Harness
  • 2 - Air Temp sensors and wiring harness
  • 1 - Mounting Pod
  • 1 - Sun Shade
  • Mounting Brackets and Hardware
  • Instructions/Manuals
  • Warranty Information

Fitments

More Information
Featured Product No
© 2020 Raceshop.ca All Rights Reserved